by

Dsc Pc Link Software

There are certain data that I refer to often and I like to include this data in the front.

Jul 01, 2004  DSC, DLS and PCLINK Showing 1-47 of 47 messages. DSC, DLS and PCLINK. Novice here, so please bear with me. I purchased a DSC Power832 (PC5010) with expander module, wireless reciever (for those places _impossible_ to get wire to) and LED keypad. You must default the laptop / software to the option of using the PC Link cable instead of it. A pc link can be wired directly to the pc 5010 no need of a pc 5401. But this can only be a temporary connection cause if the pc link is connected this will prevent the transmission to the central of any code. DSC PC-Link Cable. Includes: Keyspan USB converter DSC DLS 5 ver.1.5 software Supported Panels: –PC1616 version 4.1 + –PC1808 version 4.1 + –PC1832 version 4.1+ –PC1864 version 4.1 + DSC DLS5 software Supported Panels: –PC1616 version 4.1+ –PC1832 version 4.1+ –PC1864 version 4.1+ –SCW 9045/47 –Alexor PC9155 –Impassa PC9055.

Alarm – enable and disable

Ensure all doors and windows are closed. On the control panel, enter the master code:

[master code] = [your master code]

Disable phone line

My house has a telephone land line, but I do not have land line service. Around 11pm every night the system beeps. If the system loses power, then this has to be re-entered. To disable this beeping, on the keypad enter the following:

  • Disable the phone line: *8 5555 015 7 ##
  • Turn off phone line test transmissions *8 5555 371 9999 ##
  • Turn off the phone dialer: *8 5555 380 1 ##

Envisalink Alert Server

Login to Envisaiink

Get Envisalerts Server: 184.106.215.218

Open U-verse router: 192.168.1.254

Go to Settings, Firewall

Envisalink login

Open Browser

Enter Envisalink IP address: http://192.168.1.92/3

[envisalink username] = user

[envislink password] = [enter your password]

Dsc software, free download

Envisalink IP Address

[Envisalink IP address] = 192.168.1.92

Eyes-on Username and Password

[eyes-on username] = [your envisalink username]

[eyes-on password] = [your envisalink password]

Installer’s code

[Installer’s Code] = [Enter your Installer's Code]

5555 is the default code. You can ask your installer for the code, or you can do a factory reset, which puts it back to 5555. I do not recommend doing a factory reset because there is a significant possibility of damaging the system.

Master Code

[MasterCode] = [enter your master code]

Raspberry Pi IP

[Raspberry Pi IP] = [enter your Raspberry Pi IP address, something like 192.168.1.57]

Raspberry Pi login from Mac Book

On Mac Book, open terminal

ssh pi@[Raspberry Pi IP]

[Password]

Raspberry Pi password

Password = [your Raspberry Pi password]

Dsc Pc Link Software

Router

Router IP Address =[enter your router's IP address]

Set DSC Time and Date

*611301hhmmMMDDYY#

hh are in military time, for pm add 12. So, 4pm is 16

Zone Programming

Zone Alarm Type

01 - Alarm after providing a delay (default 60 seconds) in Stay or Away mode

Dsc Pc Link Software

03 – Alarm instantly if violated when in Stay or Away mode

05 – Interior motion sensor. Alarm instantly if violated only when the Away mode (bypasses when in Stay)

On keypad, enter:

*8 [Installer Code] 001 01 03 05 05 87 # #

Explanation of above code sequence:

  • *8 [Installer's Code]
  • 001 – This gets you into zone programming for zones
  • 01 03 05 05 87 – This is my sequence of zone alarm types, in zone order from 1 to 5.
  • All zones must be properly set.
  • # # – This saves what you’ve done and gets you back out of programming mode.
Purchase Optional Pre-programming for your system HERE
NOTE: DSC does not include the 16.5V 40VA Power Transformer needed to power this system. If you do not already have the 16.5V 40VA Power Transformer then you will need to check the option to add it
The DSC Power 1864 alarm system is the third of three new Power Series systems recently released by DSC. It replaces the former Power 864 model. It features 8 hardwired zone inputs out of the box and can be expanded up to a total of 64 hardwired zones and up to 64 wireless zones. Supports up to 8 keypads with 95 user codes; one master and one supervisor code, and has eight partitions.
Over 100 new features that the now discontinued 864 model did not have!

Features

  • 8 on-board zones
  • Expandable to 64 hardwired zones
  • Expandable to 64 wireless zones
  • 4 PGM outputs: expandable to 14 (PC5204, PC5208)
  • Template programming
  • Connect up to 8 supervised keypads with keypad zones
  • 8 partitions
  • 500-event buffer
  • 95 user codes
  • Approval Listings: European CE Directives (EMC, R&TTE, LVD), INCERT (Belgium), NCP (Holland), NFA2P Type 2 (France), IMQ (Italy) Livello 2, SBSC (Sweden) Larmklass 2, EN50131-1 Grade 2, Class II Environmental, ICASA (South Africa), FCC/IC, UL/ULC

Dsc software, free download

Extended Information